Additional rigging points make the 400 watt C12W an ideal solution for larger commercial installation or House of Worship PA applications.
The optional FH2W hardware kit has been specifically designed to expand the C12W and C15W's already advanced mounting capabilities. A single FH2W installation kit is the ideal rigging solution for installing either Yorkville Coliseum Series C12W or C15W speakers in single point hangs for solo cabinets or two-box arrays.
The staggered hole pattern in the FH2W allows for a multitude of tilt angles simply by moving the shackle towards front or the rear of the bracket. If further down-tilt is required, simply attach an eyebolt in the pullback position of the cabinet in addition to the hang point. When using C12W or C15W cabinets in two cabinet arrays, the FH2W splays the loudspeakers at the ideal angles to minimize interference and lobing.
| System Type | Two Way |
| Active or Passive | Passive |
| Power Rating (Watts) | 400 |
| Biampable | No |
| Nominal Impedance (Ohms) | 8 |
| Sensitivity (dB @1Watt/1m) | 98 |
| Max SPL (dB) | 124 |
| Frequency Response (Hz +/- 3dB) | 55 - 20k |
| Crossover Frequency (Hz) | 1100 |
| Driver Configuration | 12 inch / 1 inch |
| HF Driver(s) | 1 inch |
| HF Horn | Rotatable ABS Waveguide |
| HF Dispersion (°H x °V) | 80 x 50 Rotatable |
| HF Protection | CTL |
| Inputs - Speakon 4-pin | 2 |
| Inputs - Screw Terminal | 1 Pair |
| Flying Hardware | 1/4 inch |
| Optional Flying Hardware | FH2W Flyware bracket is available |
| Pole Mount Adapter (1 3/8"-3.5cm) | No |
| Enclosure Materials | 15mm (5/8inch) 11-ply Russian birch |
| Grille | Perforated Metal |
| Covering / Finish | Two Part White Epoxy |
| Other Details | Has rear-mount rigging points for Omnimount 60.0WA Bracket |
| Dimensions (DWH xbackW, inches) | 14.3 x 16.2 x 24.1 x 11.1 |
| Dimensions (DWH xbackW, cm) | 36.3 x 41.1 x 61.2 x 28.2 |
| Weight (lbs/kg) | 54 / 24.6 |
Specifications subject to change without notice
Additional rigging points make the 400 watt C12W an ideal solution for larger commercial installation or House of Worship PA applications.
The optional FH2W hardware kit has been specifically designed to expand the C12W and C15W's already advanced mounting capabilities. A single FH2W installation kit is the ideal rigging solution for installing either Yorkville Coliseum Series C12W or C15W speakers in single point hangs for solo cabinets or two-box arrays.
The staggered hole pattern in the FH2W allows for a multitude of tilt angles simply by moving the shackle towards front or the rear of the bracket. If further down-tilt is required, simply attach an eyebolt in the pullback position of the cabinet in addition to the hang point. When using C12W or C15W cabinets in two cabinet arrays, the FH2W splays the loudspeakers at the ideal angles to minimize interference and lobing.
| System Type | Two Way |
| Active or Passive | Passive |
| Power Rating (Watts) | 400 |
| Biampable | No |
| Nominal Impedance (Ohms) | 8 |
| Sensitivity (dB @1Watt/1m) | 98 |
| Max SPL (dB) | 124 |
| Frequency Response (Hz +/- 3dB) | 55 - 20k |
| Crossover Frequency (Hz) | 1100 |
| Driver Configuration | 12 inch / 1 inch |
| HF Driver(s) | 1 inch |
| HF Horn | Rotatable ABS Waveguide |
| HF Dispersion (°H x °V) | 80 x 50 Rotatable |
| HF Protection | CTL |
| Inputs - Speakon 4-pin | 2 |
| Inputs - Screw Terminal | 1 Pair |
| Flying Hardware | 1/4 inch |
| Optional Flying Hardware | FH2W Flyware bracket is available |
| Pole Mount Adapter (1 3/8"-3.5cm) | No |
| Enclosure Materials | 15mm (5/8inch) 11-ply Russian birch |
| Grille | Perforated Metal |
| Covering / Finish | Two Part White Epoxy |
| Other Details | Has rear-mount rigging points for Omnimount 60.0WA Bracket |
| Dimensions (DWH xbackW, inches) | 14.3 x 16.2 x 24.1 x 11.1 |
| Dimensions (DWH xbackW, cm) | 36.3 x 41.1 x 61.2 x 28.2 |
| Weight (lbs/kg) | 54 / 24.6 |
Specifications subject to change without notice