fh2w

Flyware Kit - White

The FH2W hardware kit has been specifically designed to expand the C12W and C15W’s already advanced mounting capabilities. A single FH2W installation kit is the ideal rigging solution for installing either Yorkville Coliseum Series C12W or C15W speakers in single point hangs for solo cabinets or two-box arrays.

The staggered hole pattern in the FH2W allows for a multitude of tilt angles simply by moving the shackle towards front or the rear of the bracket. If further down-tilt is required, simply attach an eyebolt in the pullback position of the cabinet in addition to the hang point. When using C12W or C15W cabinets in two cabinet arrays, the FH2W splays the loudspeakers at the ideal angles to minimize interference and lobing.

IMPORTANT!! The rigging of loudspeaker systems is an extremely serious matter! Overhead rigging requires extensive experience, including (but not limited to) calculating working load limits, hardware installation, and periodic safety inspection of all hardware and cabinetry. If you lack these qualifications, do not attempt the installation yourself, but instead use a professional structural rigger. Improper installation can result in bodily injury or death. Consult a structural engineer to calculate added loads upon the building. Structural reinforcement may be necessary to insure a safe installation.

Features

  • Ideal solution for mounting single or multiple C12W and C15W cabinets in permanent installations
  • Creates perfect two or three cabinet clusters
  • Staggered hole pattern allows multitude of down angles without additional pull backs
image 1 FH2W Flyware Kit - White
 image 2 FH2W Flyware Kit - White
 image 3 FH2W Flyware Kit - White
 image 4 FH2W Flyware Kit - White
 image 5 FH2W Flyware Kit - White
 image 6 FH2W Flyware Kit - White

Downloads

Owner's Manual

The FH2W hardware kit has been specifically designed to expand the C12W and C15W’s already advanced mounting capabilities. A single FH2W installation kit is the ideal rigging solution for installing either Yorkville Coliseum Series C12W or C15W speakers in single point hangs for solo cabinets or two-box arrays.

The staggered hole pattern in the FH2W allows for a multitude of tilt angles simply by moving the shackle towards front or the rear of the bracket. If further down-tilt is required, simply attach an eyebolt in the pullback position of the cabinet in addition to the hang point. When using C12W or C15W cabinets in two cabinet arrays, the FH2W splays the loudspeakers at the ideal angles to minimize interference and lobing.

IMPORTANT!! The rigging of loudspeaker systems is an extremely serious matter! Overhead rigging requires extensive experience, including (but not limited to) calculating working load limits, hardware installation, and periodic safety inspection of all hardware and cabinetry. If you lack these qualifications, do not attempt the installation yourself, but instead use a professional structural rigger. Improper installation can result in bodily injury or death. Consult a structural engineer to calculate added loads upon the building. Structural reinforcement may be necessary to insure a safe installation.

Features

  • Ideal solution for mounting single or multiple C12W and C15W cabinets in permanent installations
  • Creates perfect two or three cabinet clusters
  • Staggered hole pattern allows multitude of down angles without additional pull backs

Specifications

Specifications subject to change without notice