MP6D2
Micromix 6-Channel, 325-WATT Powered Mixer
The MP6D2 six channel powered mixer solves problems! 325 Watts at 4 Ohms means that you get better than 160 Watts of power to each of your 8-ohm speakers. This means more power where you need it!
All important multiple clip indicators make getting a great sound a snap by detecting distortion throughout the signal path. Other features include six XLR inputs, four balanced 1/4" inputs, dual RCA inputs on Ch. 5 & 6 for use with CD/Tape players, effects-to-monitors knob, 9-band graphic EQ, phantom power, line outputs, monitor output, record output, and effects send jack. The compact format MP6D2 also features a rugged all plywood enclosure and metal chassis that makes it ready for the road. Feature for feature, the MP6D2 is the best value in it's class!!
Features
Specifications
| Number of Channels | 6 |
| Mono Channel EQ | Low, High |
| Stereo Channel EQ | N/A |
| Channel Effects | All Channels |
| Inputs - XLR (bal) | Ch. 1 - 6 |
| Inputs - 1/4 IN | Ch. 1 - 4 |
| Inputs - RCA (unbal) | 2 Pairs |
| Clip / Mute LED | All Channels |
| Phantom Power | 24 V + LED indicator |
| Internal Effects | Digital 24 Bit; 16 Effects + parameter control |
| Effects Send | 1 Internal/External |
| Effects Return to Main | Yes |
| Effects Return to Monitor | Yes |
| Reverb / Effects Footswitch | Yes |
| Record Outputs | 1 Mono RCA Pair |
| Max Gain to Line Out -Mic Input (dB) | 55 |
| Max Gain to Line Out -Line Input (dB) | 40 |
| Master EQ -1 (type/Channels/Range -dB) | Graphic / Mono / 9 Band 63 Hz - 16,000 Hz |
| Main Outputs (Line Level) | 1x 1/4 inch (TRS) |
| Main Amp Inputs (Line Level) | 1x 1/4 inch (TRS) |
| Monitor Outputs (Line Level) | 1x 1/4 inch (TRS) |
| Outputs - Amp A - 1/4 IN Jacks | 2 |
| Mixer - Signal to Noise Ratio (dB) | 100 |
| Mixer - Freq Resp (Tone and EQ Flat CM PLSMIN 2dB) | 20 Hz - 20,000 Hz |
| Mixer- Input Ref Noise to line out AT 150 Ohms(dBv) | -117 |
| Mixer THD (Main out w/ -10dB input) | less than 0.05% |
| Amp A-Power Output AT 8 Ohms (0 PRD 1 PER THD 1kHz) | 208 |
| Amp A - Power Output AT 4 Ohms | 325 |
| THD - 1kHz (dB) | less than 0.05% |
| THD - 20Hz-20kHz (dB) | less than 0.1% |
| Hum and Noise (un / Aweight -dB) | -96 |
| Typical crosstalk -1 kHz (dB- | less than -60 |
| Input Impedance - Bal/Unbal (Ohms) | 2200/10K |
| Input Sesitivity (Vrms Sine) | 1.4 V |
| CMRR AT 60Hz (min/typ) | 54 dB /66 dB |
| Max Votage Gain (dB) | 27 |
| Power Consumption (typ/max) | 270 VA / 550 VA |
| Protection | Thermal / Load / DC |
| Cooling | Passive Heat Sink |
| Transformer Type | Toroidal |
| Finish | Blue/Black Carpet, Scratch Resistant Front Panel |
| Chassis Construction | Heavey Gauge Metal with Plywood Cabinet |
| Dimensions (DWH inches) | 10 x 21 x 9.25 |
| Dimensions (DWH cm) | 25.4 x 53.3 x 23.5 |
| Weight (lbs/kg) | 27 / 12 |
Specifications subject to change without notice
The MP6D2 six channel powered mixer solves problems! 325 Watts at 4 Ohms means that you get better than 160 Watts of power to each of your 8-ohm speakers. This means more power where you need it!
All important multiple clip indicators make getting a great sound a snap by detecting distortion throughout the signal path. Other features include six XLR inputs, four balanced 1/4" inputs, dual RCA inputs on Ch. 5 & 6 for use with CD/Tape players, effects-to-monitors knob, 9-band graphic EQ, phantom power, line outputs, monitor output, record output, and effects send jack. The compact format MP6D2 also features a rugged all plywood enclosure and metal chassis that makes it ready for the road. Feature for feature, the MP6D2 is the best value in it's class!!
Features
Specifications
| Number of Channels | 6 |
| Mono Channel EQ | Low, High |
| Stereo Channel EQ | N/A |
| Channel Effects | All Channels |
| Inputs - XLR (bal) | Ch. 1 - 6 |
| Inputs - 1/4 IN | Ch. 1 - 4 |
| Inputs - RCA (unbal) | 2 Pairs |
| Clip / Mute LED | All Channels |
| Phantom Power | 24 V + LED indicator |
| Internal Effects | Digital 24 Bit; 16 Effects + parameter control |
| Effects Send | 1 Internal/External |
| Effects Return to Main | Yes |
| Effects Return to Monitor | Yes |
| Reverb / Effects Footswitch | Yes |
| Record Outputs | 1 Mono RCA Pair |
| Max Gain to Line Out -Mic Input (dB) | 55 |
| Max Gain to Line Out -Line Input (dB) | 40 |
| Master EQ -1 (type/Channels/Range -dB) | Graphic / Mono / 9 Band 63 Hz - 16,000 Hz |
| Main Outputs (Line Level) | 1x 1/4 inch (TRS) |
| Main Amp Inputs (Line Level) | 1x 1/4 inch (TRS) |
| Monitor Outputs (Line Level) | 1x 1/4 inch (TRS) |
| Outputs - Amp A - 1/4 IN Jacks | 2 |
| Mixer - Signal to Noise Ratio (dB) | 100 |
| Mixer - Freq Resp (Tone and EQ Flat CM PLSMIN 2dB) | 20 Hz - 20,000 Hz |
| Mixer- Input Ref Noise to line out AT 150 Ohms(dBv) | -117 |
| Mixer THD (Main out w/ -10dB input) | less than 0.05% |
| Amp A-Power Output AT 8 Ohms (0 PRD 1 PER THD 1kHz) | 208 |
| Amp A - Power Output AT 4 Ohms | 325 |
| THD - 1kHz (dB) | less than 0.05% |
| THD - 20Hz-20kHz (dB) | less than 0.1% |
| Hum and Noise (un / Aweight -dB) | -96 |
| Typical crosstalk -1 kHz (dB- | less than -60 |
| Input Impedance - Bal/Unbal (Ohms) | 2200/10K |
| Input Sesitivity (Vrms Sine) | 1.4 V |
| CMRR AT 60Hz (min/typ) | 54 dB /66 dB |
| Max Votage Gain (dB) | 27 |
| Power Consumption (typ/max) | 270 VA / 550 VA |
| Protection | Thermal / Load / DC |
| Cooling | Passive Heat Sink |
| Transformer Type | Toroidal |
| Finish | Blue/Black Carpet, Scratch Resistant Front Panel |
| Chassis Construction | Heavey Gauge Metal with Plywood Cabinet |
| Dimensions (DWH inches) | 10 x 21 x 9.25 |
| Dimensions (DWH cm) | 25.4 x 53.3 x 23.5 |
| Weight (lbs/kg) | 27 / 12 |
Specifications subject to change without notice