NX series enclosures are manufactured using tough, light weight, low resonance variable density composite materials. In addition they are UV and moisture resistant. Stand mount and flying hardware are included. In addition the enclosure itself has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor, with recessed input jack plate and an ideal wedge monitor angle that was taken into account in the initial design.
The NX Series use custom designed neodymium woofers that are lighter than conventional speakers by an average of 60%. With superior heat dissipation, neodymium drivers exhibit no heat induced impedance shift. Although the NX Series loudspeakers seem weightless, these loudspeakers are not lightweights when it comes to performance. These loudspeakers are the ideal P/A solution for install, for mobile DJ, or live music reinforcement.
The high output, ultra-clear NX20 is made from light, weatherproof and durable polymers (not thin injection molded plastic). While perfect for fixed installations, the NX20 is also at home on the road. This easy to move 31 pound (14Kg) loudspeaker is finished in an unobtrusive flat black that is great for low visibility in clubs, churches or restaurants. The unique enclosure design means the NX20 can easily be used as a front of house PA loudspeaker, or as a wedge monitor.
The NX20 comes equipped with flying hardware and has an incorporated stand mount adapter. It also features our tried and true CTL™ (current to light) protection system on the high frequency driver.
With the optional steel U-Bracket flying assembly (NXF100) the NX Flyware System can also be utilized for either wall mounting (using the NXF105 Wall Mount Bracket) or flown as a linked array system (with the NXF110 Array Link Assembly) allowing up to six cabinets for a full, circular array.
|Active or Passive||Passive|
|Power Rating (Watts)||350|
|Nominal Impedance (Ohms)||8|
|Sensitivity (dB @1Watt/1m)||101|
|Max SPL (dB)||126|
|Frequency Response (Hz +/- 3dB)||70 - 18k|
|Crossover Frequency (Hz)||2500|
|Driver Configuration||12 inch / 1 inch|
|HF Driver(s)||1 inch Throat, Ceramic Magnet, 1 inch Mylar voicecoil|
|HF Dispersion (°H x °V)||90 x 40|
|LF Driver(s)||12 inch Neodymium Magnet, 2.5 inch voicecoil|
|Inputs - 1/4" Jacks||2|
|Inputs - Speakon 4-pin||1|
|Bar Handles||1 (Side)|
|Flying Hardware||2 (Top) 2 (Bottom)|
|Pole Mount Adapter (1 3/8"-3.5cm)||Yes|
|Enclosure Materials||Variable Density Molded Composite|
|Dimensions (DWH xbackW, inches)||14 x 16 x 24 x 7.5|
|Dimensions (DWH xbackW, cm)||36 x 41 x 61 x 19|
|Weight (lbs/kg)||25 / 12.8|
Specifications subject to change without notice