Legacy Series - IS-112F
The IS-112F is a compact enclosure designed for installation applications. The incorporated flying hardware makes suspension a snap while maintaining the highest level of safety possible. Two fly-points are located on the top of the box while a pull-back point is provided on the bottom. This allows the box to be mounted at almost any angle using 3/8" forged shoulder eye bolts (not included).
Overview
This 2-way passive enclosure handles 120 Watts nominal power and is ideally suited for music or vocal P.A. where medium to low sound pressure levels are required. The high frequency dispersion allows either tight grouping or wide spacing for any number of configurations and applications. The IS-112F's piezo tweeter and custom 12" low frequency driver combine to provide a great sounding, cost effective installation solution. Two 1/4" phone jacks are provided on the rear for easy 'daisy-chain' installation.
Available in white or light wood grain finish with matching cloth grill, the IS-112F is an obvious choice for many types of applications.
Specifications
| System Type | 2-Way |
| Active or Passive | Passive |
| Power Rating (Watts) | 120 |
| Biampable | No |
| Nominal Impedance (Ohms) | 8 |
| Sensitivity (dB @1Watt/1m) | 98 |
| Max SPL (dB) | 119 |
| Frequency Response (Hz +/- 3dB) | 75 -16,000 |
| Crossover Frequency (Hz) | 6000 |
| Driver Configuration | Piezo Tweeter, 12 Inch |
| HF Driver(s) | Piezo Tweeter |
| HF Protection | CTL™ (Current-to-light) |
| LF Driver(s) | 12 inch |
| Inputs | 2 |
| Inputs - 1/4" Jacks | 2 |
| Flying Hardware | 2 top & 1 pullback |
| Enclosure Materials | 3/4 inch MDF |
| Baffle Material | Plywood |
| Port(s) | 1 |
| Grille | Fabric (Optional Quick Pin Grille) |
| Covering / Finish | Vinyl Covering |
| Optional Covering / Finishes | White or Light Woodgrain |
| Dimensions (DWH xbackW, inches) | 12x16x19 |
| Dimensions (DWH xbackW, cm) | 31x41x48 |
| Weight (lbs/kg) | 35 / 16 |
Specifications subject to change without notice