Effective High / Low EQ, XLR balanced microphone input as will as an XLR / TRS 1/4-inch balanced combi-jack line input on the power module means the NX300P can be easily connected to any source and quickly EQ balanced for the room. An XLR balanced line output allows multiple NX300P's to be linked together for use in an array or for easy distribution around a large room when used as repeater cabinets.
The NX300P enclosure, like all cabinets in the NX loudspeaker line, has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor cabinet with well-protected inputs and controls.
The NX300P can easily be used in any orientation, and close to walls, floors and in close arrays with multiple cabinets. Particular care was taken designing the components to reduce extraneous heat production.
| Active or Passive | Active |
| Power Rating (Watts) | 300 Watts (600 Watts Peak) |
| Biampable | Self Powered |
| Biamp Operation Only | Yes |
| Max SPL (dB) | 125dB Peak (122dB Continuous) |
| Frequency Response (Hz +/- 3dB) | 55Hz - 26kHz |
| Crossover Frequency (Hz) | 1.4 kHz |
| Driver Configuration | 15 inch / 1 inch |
| HF Driver(s) | 1 inch Throat, Ceramic Magnet, 1.4 inch PETP Film |
| HF Dispersion (°H x °V) | 80 x 50 |
| LF Driver(s) | 15 inch Ceramic Magnet |
| HF Amplifier Type | Class A/B |
| LF Amplifier Type | Two Tier Class H |
| Power Cable | Yes |
| Power Switch | Yes |
| Power Consumption (typ/max) | 120 / 310 Va |
| Inputs | 2 |
| Inputs - 1/4" Jacks | 1 Line / 1 Mic (XLR Combi jacks) |
| Input Sensitivity (Vrms Sine) | 1.23 Vms +4dBu |
| Mixer Controls | Mic Gain Line In Gain Bass/Treble |
| Level Controls | Line/Mic |
| Limiter | Yes |
| LED Indicators | Power, Limit, Clip |
| Feet | Yes |
| Bar Handles | 1 (Side) |
| Flying Hardware | 2 (Top), 2 (Bottom), 1 (Pullback) |
| Optional Flying Hardware | NX Flyware |
| Pole Mount Adapter (1 3/8"-3.5cm) | Yes |
| Enclosure Materials | Injection molded Polypropylene |
| Grille | Perforated Metal |
| Dimensions (DWH xbackW, inches) | 15 x 22 x 32 x 9.5 |
| Dimensions (DWH xbackW, cm) | 38 x 56 x 84 x 24 |
| Weight (lbs/kg) | 51.5 / 23.4 |
Specifications subject to change without notice
Effective High / Low EQ, XLR balanced microphone input as will as an XLR / TRS 1/4-inch balanced combi-jack line input on the power module means the NX300P can be easily connected to any source and quickly EQ balanced for the room. An XLR balanced line output allows multiple NX300P's to be linked together for use in an array or for easy distribution around a large room when used as repeater cabinets.
The NX300P enclosure, like all cabinets in the NX loudspeaker line, has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor cabinet with well-protected inputs and controls.
The NX300P can easily be used in any orientation, and close to walls, floors and in close arrays with multiple cabinets. Particular care was taken designing the components to reduce extraneous heat production.
| Active or Passive | Active |
| Power Rating (Watts) | 300 Watts (600 Watts Peak) |
| Biampable | Self Powered |
| Biamp Operation Only | Yes |
| Max SPL (dB) | 125dB Peak (122dB Continuous) |
| Frequency Response (Hz +/- 3dB) | 55Hz - 26kHz |
| Crossover Frequency (Hz) | 1.4 kHz |
| Driver Configuration | 15 inch / 1 inch |
| HF Driver(s) | 1 inch Throat, Ceramic Magnet, 1.4 inch PETP Film |
| HF Dispersion (°H x °V) | 80 x 50 |
| LF Driver(s) | 15 inch Ceramic Magnet |
| HF Amplifier Type | Class A/B |
| LF Amplifier Type | Two Tier Class H |
| Power Cable | Yes |
| Power Switch | Yes |
| Power Consumption (typ/max) | 120 / 310 Va |
| Inputs | 2 |
| Inputs - 1/4" Jacks | 1 Line / 1 Mic (XLR Combi jacks) |
| Input Sensitivity (Vrms Sine) | 1.23 Vms +4dBu |
| Mixer Controls | Mic Gain Line In Gain Bass/Treble |
| Level Controls | Line/Mic |
| Limiter | Yes |
| LED Indicators | Power, Limit, Clip |
| Feet | Yes |
| Bar Handles | 1 (Side) |
| Flying Hardware | 2 (Top), 2 (Bottom), 1 (Pullback) |
| Optional Flying Hardware | NX Flyware |
| Pole Mount Adapter (1 3/8"-3.5cm) | Yes |
| Enclosure Materials | Injection molded Polypropylene |
| Grille | Perforated Metal |
| Dimensions (DWH xbackW, inches) | 15 x 22 x 32 x 9.5 |
| Dimensions (DWH xbackW, cm) | 38 x 56 x 84 x 24 |
| Weight (lbs/kg) | 51.5 / 23.4 |
Specifications subject to change without notice