The NX250 also features our ingenious PTC™ (Positive Temperature Coefficient) protection on the high frequency compression driver. PTC™ is an ingenious current sensing / self resetting breaker that offers some serious advantages over current protection schemes used in many loudspeaker cabinets. This protection scheme, while always present in the signal path, remains inaudible until it becomes necessary for it to react. It kicks in at a point where it effectively reduces output to the horn and protects that diaphragm from damage due to excessive power input or signal distortion. Unlike a breaker it does not require a physical reset to allow signal back to the horn driver, and unlike a bulb or fuse, does not need to be replaced if the circuit is tripped, and the fuse is blown. Where PTC™ shines is in heavy feedback environments where most horn diaphragm damage occurs. In rare situations even where a microphone might be dropped in a monitor, the sustained 'squeal' can destroy diaphragms in seconds. PTC™ will significantly reduce output level to the horn to protect the diaphragm. When the situation has been rectified, and the feedback eliminated the horn will return to full operating level within half a second.
The NX250 enclosure itself has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor. An improved wedge monitor angle has been incorporated into the new design.
System Type | 2-Way |
Active or Passive | Passive |
Power Rating (Watts) | 250 |
Biampable | No |
Nominal Impedance (Ohms) | 8 |
Sensitivity (dB @1Watt/1m) | 97 |
Max SPL (dB) | 121 |
Frequency Response (Hz +/- 3dB) | 60 - 18khz |
Crossover Frequency (Hz) | 2.3k |
Driver Configuration | 12 inch / 1 inch |
HF Driver(s) | 1 Inch Throat, Ceramic Magnet, 1 Inch voicecoil |
HF Dispersion (°H x °V) | 80 x 50 |
HF Protection | PTC™ |
LF Driver(s) | 12 Inch, Ceramic Magnet, 2 inch voicecoil |
LF Power Rating(Watts) | 250 |
LF Impedance (Ohms) | 8 |
Inputs - 1/4" Jacks | 2 |
Inputs - Speakon 4-pin | 1 |
Feet | Yes |
Bar Handles | 1 (Side) |
Optional Flying Hardware | NX Flyware / Eyebolts |
Pole Mount Adapter (1 3/8"-3.5cm) | Yes |
Enclosure Materials | Variable Density Molded Composite |
Grille | Perforated Metal |
Dimensions (DWH xbackW, inches) | 13.25 x 16.5 x 27.25 x 8 |
Dimensions (DWH xbackW, cm) | 0.33 x 0.42 x 0.69 x 0.2 |
Weight (lbs/kg) | 35.5 / 16 |
Specifications subject to change without notice
The NX250 also features our ingenious PTC™ (Positive Temperature Coefficient) protection on the high frequency compression driver. PTC™ is an ingenious current sensing / self resetting breaker that offers some serious advantages over current protection schemes used in many loudspeaker cabinets. This protection scheme, while always present in the signal path, remains inaudible until it becomes necessary for it to react. It kicks in at a point where it effectively reduces output to the horn and protects that diaphragm from damage due to excessive power input or signal distortion. Unlike a breaker it does not require a physical reset to allow signal back to the horn driver, and unlike a bulb or fuse, does not need to be replaced if the circuit is tripped, and the fuse is blown. Where PTC™ shines is in heavy feedback environments where most horn diaphragm damage occurs. In rare situations even where a microphone might be dropped in a monitor, the sustained 'squeal' can destroy diaphragms in seconds. PTC™ will significantly reduce output level to the horn to protect the diaphragm. When the situation has been rectified, and the feedback eliminated the horn will return to full operating level within half a second.
The NX250 enclosure itself has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor. An improved wedge monitor angle has been incorporated into the new design.
System Type | 2-Way |
Active or Passive | Passive |
Power Rating (Watts) | 250 |
Biampable | No |
Nominal Impedance (Ohms) | 8 |
Sensitivity (dB @1Watt/1m) | 97 |
Max SPL (dB) | 121 |
Frequency Response (Hz +/- 3dB) | 60 - 18khz |
Crossover Frequency (Hz) | 2.3k |
Driver Configuration | 12 inch / 1 inch |
HF Driver(s) | 1 Inch Throat, Ceramic Magnet, 1 Inch voicecoil |
HF Dispersion (°H x °V) | 80 x 50 |
HF Protection | PTC™ |
LF Driver(s) | 12 Inch, Ceramic Magnet, 2 inch voicecoil |
LF Power Rating(Watts) | 250 |
LF Impedance (Ohms) | 8 |
Inputs - 1/4" Jacks | 2 |
Inputs - Speakon 4-pin | 1 |
Feet | Yes |
Bar Handles | 1 (Side) |
Optional Flying Hardware | NX Flyware / Eyebolts |
Pole Mount Adapter (1 3/8"-3.5cm) | Yes |
Enclosure Materials | Variable Density Molded Composite |
Grille | Perforated Metal |
Dimensions (DWH xbackW, inches) | 13.25 x 16.5 x 27.25 x 8 |
Dimensions (DWH xbackW, cm) | 0.33 x 0.42 x 0.69 x 0.2 |
Weight (lbs/kg) | 35.5 / 16 |
Specifications subject to change without notice