E10

Legacy 10-inch / 1-inch - 325 watts

Ideal for any small PA rental house, installer or sound company, these loudspeakers may replace a number of specific application cabinets in any inventory.

The E10 is loaded with 100° x 25° ABS Waveguide horn assembly. A modified trapezoidal shape and recessed input jack panel and handle means the E10 cabinet can function perfectly as a wedge monitor or front-of-house loudspeaker. Unlike some 'multi-function' loudspeakers currently in the marketplace, great care has been taken in the design process to ensure that élite cabinets will perform without compromising functionality as either a monitor or a front-of-house enclosure. Neither application was considered as an afterthought.

Integrated stand mount adapters and flyware means the E10 can be utilized in any permanent install or touring application. In addition, the modified cabinet shape means the élite E10 can be installed much closer to vertical surfaces and in some cases, under balconies in tight locations, and can be arrayed in a much tighter less obtrusive cluster.

When used with the EP10 processor, the E10 can be easily used with any élite series subwoofer.

E10 - Black Ozite (Carpet) Finish
E10B - Black Ultrathane (Painted) Finish

Features

  • 650 Watt Full Range Loudspeaker (325 Watts Program)
  • 10-inch Woofer / 1-inch Compression Driver
  • Max SPL 128dB Peak (125dB Continuous)
  • Designed for Front-of-House or Monitor Applications
  • 100° x 25° ABS Waveguide Horn
  • Innovative CTL™ High Frequency Driver Protection
  • 2 x Speakon™ and 2 x 1/4-inch Parallel Inputs
  • Integrated All Metal Speaker Standmount Adaptor
  • Solid 5/8-inch (15mm) Birch Plywood Construction
  • Made in Canada

Specifications

System Type Two Way
Active or Passive Passive
Power Rating (Watts) 325 Watts (650 Watts Peak / 250 Watts Continuous)
Biampable No
Nominal Impedance (Ohms) 8
Sensitivity (dB @1Watt/1m) 100
Max SPL (dB) 128dB Peak (125dB Continuous)
Frequency Response (Hz +/- 3dB) 65 - 18k
Crossover Frequency (Hz) 2900
Driver Configuration 10-inch / 1-inch
HF Driver(s) 1-inch throat (1-inch Titanium Diaphragm)
HF Horn ABS Waveguide
HF Dispersion (°H x °V) 100 x 25
HF Protection CTL™
LF Driver(s) 10-inch (2-inch voicecoil)
Inputs - 1/4" Jacks 2
Inputs - Speakon 4-pin 2
Bar Handles 1
Flying Hardware 3/8 inch x 3 (2 Top / 1 Back)
Pole Mount Adapter (1 3/8"-3.5cm) Yes
Enclosure Materials 15mm (5/8inch) 11-ply Russian Birch
Grille Perforated Metal
Covering / Finish Black Ozite (Carpet)
Optional Covering / Finishes Black Ultrathane Paint (E10B)
Processor (optional) EP10
Dimensions (DWH xbackW, inches) 12 x 13 x 18.5 x 5.5
Dimensions (DWH xbackW, cm) 30 x 33 x 45 x 14
Weight (lbs/kg) 28.2 / 12.8

Specifications subject to change without notice

e10
e10front
e10monitor

Overview

Ideal for any small PA rental house, installer or sound company, these loudspeakers may replace a number of specific application cabinets in any inventory.

The E10 is loaded with 100° x 25° ABS Waveguide horn assembly. A modified trapezoidal shape and recessed input jack panel and handle means the E10 cabinet can function perfectly as a wedge monitor or front-of-house loudspeaker. Unlike some 'multi-function' loudspeakers currently in the marketplace, great care has been taken in the design process to ensure that élite cabinets will perform without compromising functionality as either a monitor or a front-of-house enclosure. Neither application was considered as an afterthought.

Integrated stand mount adapters and flyware means the E10 can be utilized in any permanent install or touring application. In addition, the modified cabinet shape means the élite E10 can be installed much closer to vertical surfaces and in some cases, under balconies in tight locations, and can be arrayed in a much tighter less obtrusive cluster.

When used with the EP10 processor, the E10 can be easily used with any élite series subwoofer.

E10 - Black Ozite (Carpet) Finish
E10B - Black Ultrathane (Painted) Finish

Features

  • 650 Watt Full Range Loudspeaker (325 Watts Program)
  • 10-inch Woofer / 1-inch Compression Driver
  • Max SPL 128dB Peak (125dB Continuous)
  • Designed for Front-of-House or Monitor Applications
  • 100° x 25° ABS Waveguide Horn
  • Innovative CTL™ High Frequency Driver Protection
  • 2 x Speakon™ and 2 x 1/4-inch Parallel Inputs
  • Integrated All Metal Speaker Standmount Adaptor
  • Solid 5/8-inch (15mm) Birch Plywood Construction
  • Made in Canada

Specifications

System Type Two Way
Active or Passive Passive
Power Rating (Watts) 325 Watts (650 Watts Peak / 250 Watts Continuous)
Biampable No
Nominal Impedance (Ohms) 8
Sensitivity (dB @1Watt/1m) 100
Max SPL (dB) 128dB Peak (125dB Continuous)
Frequency Response (Hz +/- 3dB) 65 - 18k
Crossover Frequency (Hz) 2900
Driver Configuration 10-inch / 1-inch
HF Driver(s) 1-inch throat (1-inch Titanium Diaphragm)
HF Horn ABS Waveguide
HF Dispersion (°H x °V) 100 x 25
HF Protection CTL™
LF Driver(s) 10-inch (2-inch voicecoil)
Inputs - 1/4" Jacks 2
Inputs - Speakon 4-pin 2
Bar Handles 1
Flying Hardware 3/8 inch x 3 (2 Top / 1 Back)
Pole Mount Adapter (1 3/8"-3.5cm) Yes
Enclosure Materials 15mm (5/8inch) 11-ply Russian Birch
Grille Perforated Metal
Covering / Finish Black Ozite (Carpet)
Optional Covering / Finishes Black Ultrathane Paint (E10B)
Processor (optional) EP10
Dimensions (DWH xbackW, inches) 12 x 13 x 18.5 x 5.5
Dimensions (DWH xbackW, cm) 30 x 33 x 45 x 14
Weight (lbs/kg) 28.2 / 12.8

Specifications subject to change without notice