NX250P

Legacy 200w, 12-inch / 1-inch Active

A three band EQ, XLR balanced microphone input as will as an XLR / TRS 1/4-inch balanced combi-jack line input on the power module means the NX250P can be easily connected to any source and quickly EQ balanced for the room. An XLR balanced line output allows multiple NX250's to be linked together for use in an array or for easy distribution around a large room when used as repeater cabinets.

The horn amplifier uses a two-tier class A/B technology, allowing the horn to produce loud clean transients to keep up with the high output of the woofer. The woofer or low frequency amplifier uses a class-H two-tier amplifier technology that provides a lighter weight, more efficient amplifier with higher headroom and lower operating temperature, making it the ideal amplification solution for this active loudspeaker.

The NX250P enclosure, like all cabinets in the NX loudspeaker line, has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor cabinet with well-protected inputs and controls. The NX250P can easily be used in any orientation, and close to walls, floors and in close arrays with multiple cabinets. Particular care was taken designing the components to reduce extraneous heat production.

Features

  • Dual purpose full range and wedge monitor format enclosure
  • Ultra-clear reproduction throughout bandwidth
  • Lightweight, high efficiency, high tech, 200 Watt Bi-amped power module
  • Combi-jack XLR/1/4-inch TRS input
  • XLR output for easy connection and looping
  • Direct microphone input with level control
  • Three band overall EQ controls
  • 12" Ceramic Magnet Woofer
  • High quality 1" High Frequency driver
  • Integrated flying hardware (3/8" threaded holes)
  • Tough, full length metal grille
  • Recessed Control panel

Specifications

System Type 2-Way
Active or Passive Active
Power Rating (Watts) 200
Biampable Self Powered
Biamp Operation Only Yes
Max SPL (dB) 120
Frequency Response (Hz +/- 3dB) 55 - 26k
Crossover Frequency (Hz) 2300
Driver Configuration 12 inch / 1 inch
HF Driver(s) 1 inch Throat, Ceramic Magnet, 1 inch Mylar voicecoil
HF Dispersion (°H x °V) 80 x 50
LF Driver(s) 12 inch Ceramic Magnet
Total Power (Watts) 200
HF Power Amplifier (Watts) 20
HF Amplifier Type Class A/B
LF Power Amplifier (Watts) 180
LF Amplifier Type Two Tier Class H
Power Cable Yes
Power Switch Yes
Power Consumption (typ/max) 120 / 310 VA
Inputs 2
Inputs - 1/4" Jacks 1 Line / 1 Mic (XLR Combi jacks)
Input Sensitivity (Vrms Sine) +4dBv / 1.23V
Mixer Controls Mic Gain
Line In Gain
Bass/Mid/Treble
Level Controls Main Volume
Limiter Yes
LED Indicators Power/Activity/Limit
Feet Yes
Bar Handles 1 (Side)
Flying Hardware 2 (Top), 2 (Bottom), 1 (Pullback)
Optional Flying Hardware NX Flyware
Pole Mount Adapter (1 3/8"-3.5cm) Yes
Enclosure Materials Variable Density Molded Composite
Grille Perforated Metal
Dimensions (DWH xbackW, inches) 13.25 x 16.5 x 27.25 x 8
Dimensions (DWH xbackW, cm) 33 x 42 x 69 x 20
Weight (lbs/kg) 42 / 19

Specifications subject to change without notice

nx250p

Overview

A three band EQ, XLR balanced microphone input as will as an XLR / TRS 1/4-inch balanced combi-jack line input on the power module means the NX250P can be easily connected to any source and quickly EQ balanced for the room. An XLR balanced line output allows multiple NX250's to be linked together for use in an array or for easy distribution around a large room when used as repeater cabinets.

The horn amplifier uses a two-tier class A/B technology, allowing the horn to produce loud clean transients to keep up with the high output of the woofer. The woofer or low frequency amplifier uses a class-H two-tier amplifier technology that provides a lighter weight, more efficient amplifier with higher headroom and lower operating temperature, making it the ideal amplification solution for this active loudspeaker.

The NX250P enclosure, like all cabinets in the NX loudspeaker line, has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor cabinet with well-protected inputs and controls. The NX250P can easily be used in any orientation, and close to walls, floors and in close arrays with multiple cabinets. Particular care was taken designing the components to reduce extraneous heat production.

Features

  • Dual purpose full range and wedge monitor format enclosure
  • Ultra-clear reproduction throughout bandwidth
  • Lightweight, high efficiency, high tech, 200 Watt Bi-amped power module
  • Combi-jack XLR/1/4-inch TRS input
  • XLR output for easy connection and looping
  • Direct microphone input with level control
  • Three band overall EQ controls
  • 12" Ceramic Magnet Woofer
  • High quality 1" High Frequency driver
  • Integrated flying hardware (3/8" threaded holes)
  • Tough, full length metal grille
  • Recessed Control panel

Specifications

System Type 2-Way
Active or Passive Active
Power Rating (Watts) 200
Biampable Self Powered
Biamp Operation Only Yes
Max SPL (dB) 120
Frequency Response (Hz +/- 3dB) 55 - 26k
Crossover Frequency (Hz) 2300
Driver Configuration 12 inch / 1 inch
HF Driver(s) 1 inch Throat, Ceramic Magnet, 1 inch Mylar voicecoil
HF Dispersion (°H x °V) 80 x 50
LF Driver(s) 12 inch Ceramic Magnet
Total Power (Watts) 200
HF Power Amplifier (Watts) 20
HF Amplifier Type Class A/B
LF Power Amplifier (Watts) 180
LF Amplifier Type Two Tier Class H
Power Cable Yes
Power Switch Yes
Power Consumption (typ/max) 120 / 310 VA
Inputs 2
Inputs - 1/4" Jacks 1 Line / 1 Mic (XLR Combi jacks)
Input Sensitivity (Vrms Sine) +4dBv / 1.23V
Mixer Controls Mic Gain
Line In Gain
Bass/Mid/Treble
Level Controls Main Volume
Limiter Yes
LED Indicators Power/Activity/Limit
Feet Yes
Bar Handles 1 (Side)
Flying Hardware 2 (Top), 2 (Bottom), 1 (Pullback)
Optional Flying Hardware NX Flyware
Pole Mount Adapter (1 3/8"-3.5cm) Yes
Enclosure Materials Variable Density Molded Composite
Grille Perforated Metal
Dimensions (DWH xbackW, inches) 13.25 x 16.5 x 27.25 x 8
Dimensions (DWH xbackW, cm) 33 x 42 x 69 x 20
Weight (lbs/kg) 42 / 19

Specifications subject to change without notice