CM5/70

Coliseum 30 Watt Ceiling Speaker

Built in 70-volt taps at 5, 10 or 20 watts as well as optional 8-ohm (30 watt) operation means that virtually any amplification or paging system, including the Coliseum CA1 or CA1T can drive the CM5/70.

Features

5-inch High Performance Flush Mount Ceiling Speaker
Selectable 70-volt or 8-ohm Operation
Power Taps at 5, 10 and 20 Watts
30 watts (8-ohm mode)
Open Back Design
Mounting Hardware Included

Specifications

System Type	Ceiling Speaker
Active or Passive	Passive
Power Rating (Watts)	30
Nominal Impedance (Ohms)	8 / 70-volt Transformer
Sensitivity (dB @1Watt/1m)	91
Frequency Response (Hz +/- 3dB)	150 - 20k
Driver Configuration	Single 5 inch
HF Dispersion (°H x °V)	90 x 90
Inputs - Screw Terminal	Solder Lugs
Enclosure Materials	ABS Plastic
Grille	Perforated Metal
Wiring	5W (Blue) 10W (Yellow) 20W (Red) for 70V Operation
Dimensions (DWH xbackW, inches)	8 x 3
Dimensions (DWH xbackW, cm)	20 x 7.6
Weight (lbs/kg)	3.0 / 1.4

Specifications subject to change without notice

Downloads

Spec Sheet

Overview

Features

5-inch High Performance Flush Mount Ceiling Speaker
Selectable 70-volt or 8-ohm Operation
Power Taps at 5, 10 and 20 Watts
30 watts (8-ohm mode)
Open Back Design
Mounting Hardware Included

Specifications

System Type	Ceiling Speaker
Active or Passive	Passive
Power Rating (Watts)	30
Nominal Impedance (Ohms)	8 / 70-volt Transformer
Sensitivity (dB @1Watt/1m)	91
Frequency Response (Hz +/- 3dB)	150 - 20k
Driver Configuration	Single 5 inch
HF Dispersion (°H x °V)	90 x 90
Inputs - Screw Terminal	Solder Lugs
Enclosure Materials	ABS Plastic
Grille	Perforated Metal
Wiring	5W (Blue) 10W (Yellow) 20W (Red) for 70V Operation
Dimensions (DWH xbackW, inches)	8 x 3
Dimensions (DWH xbackW, cm)	20 x 7.6
Weight (lbs/kg)	3.0 / 1.4

Specifications subject to change without notice